What's on the outside counts December 1st 2009 Products from JohnsonDiversey tackle graffiti on both tough and sensitive surfaces
Sprint Spitfire from JohnsonDiversey is a powerful ready-to-use
heavy duty cleaner that removes graffiti and other stains from
most alkaline resistant hard surfaces. Its powerful formulation is
based on a mix of detergents and solvents that quickly and efficiently
remove mineral and vegetable oils as well as petrol
stains.
It is also particularly efficient for removing stains
such as ink, marker, pencil, lipstick, black heel marks,
smoke films, greasy food and other tenacious marks.
For light soiling Sprint Spitfire is sprayed onto a
cloth or sponge and applied to the stained
surface. It can be left for a short while and
agitated if required before the affected area is
simply wiped clean. For tougher stains the
product is sprayed directly onto the stained
area, scrubbed to speed up the cleaning
process and allowed to act before wiping
clean.
Sprint Spitfire is supplied ready to use in
750ml spray bottles. It is easy to apply, does
not require rinsing, except on stainless steel
surfaces, and dries quickly without leaving
streaks or traces.The formulation is freshly
fragranced to create a pleasant odour which
means it is suitable for public areas and enclosed spaces.
When graffiti is present on sensitive surfaces, the new TASKI
WipeOut Sponge from JohnsonDiversey offers a chemical free
cleaning option.The spot cleaning pad removes stains from surfaces
using water alone.The specially designed white polymeric foam
cleaning pad is soft, gentle and flexible which means it can be used
on many surfaces safely without the risk of scouring or scratching.
TASKI WipeOut Sponge is especially suitable
for cleaning surfaces such as plastics
and ceramics where strong
chemicals, abrasive materials or
scouring powders could cause
damage. Potential applications
include removal of minor graffiti on
buses and trains, clearing accidental
permanent marker from whiteboards, and cleaning stubborn spots
from ceramic cooker hobs.
No sprays or cleaners are necessary because the pad is simply
rinsed under a tap, squeezed to remove excess moisture and then
rubbed gently over the mark to remove the stain quickly and easily.
Rinsing with clean water regenerates the pad which can be re-used
until the white foam has worn away. It can then be disposed of safely.
Please contact the company for
further information. More articles from Diversey Limited: |